How to Drain & Fill Your Beachcomber Hot Tub

How to Drain & Fill Your Beachcomber Hot Tub

Winter is on its way, and now is the perfect opportunity to give your hot tub a deep clean before a busy soaking season! By completing your hot tub water care now, it will help you get through the next 3-4 months without having to worry. Drain and fill your hot tub so you and your family can hop in and enjoy the perfect outdoor oasis.

During this process, it is a great time to inspect your Beachcomber Hot Tub and its components for any signs of damage and wear. Avoid emergency repairs by making any necessary repairs and doing preventative hot tub maintenance.

We’ve created a step-by-step approach to help you get your hot tub ready for the busy season.

The Let Go - Easy as A, B, C

  • STEP A: Remove & Soak

To remove the filter, twist the trim ring counterclockwise to unlock it and remove it along with the floating weir assembly. Lift out the basket, and pull it out. Remove debris from the basket and rinse. Soak the filter in Beachcomber’s FILTER SOAK™ cleaner and rinse thoroughly with a spray nozzle to remove residue.

Filter Soak is an environmentally friendly Ecologo® certified, one-shot, fast-acting, alkaline detergent cleaner. It removes organic contaminants and improves the performance of your filter. For best results use in conjunction with a FILTER CLEANING CANISTER™.

bottle of beachcomber hot tubs filter soak - white bottle with metallic green label with beachcomber logo and product name and description

  • STEP B: Cleanse & Neutralize

Before draining your hot tub, add Beachcomber’s PIPE CLEANSE™ to your hot tub water and let it circulate for at least 12 hours. This will flush out an amazing amount of biofilm and waste from pipes, leaving a cleaner hot tub for a better experience.

Check the water for any sanitizer. If sanitizer is present, add NEUTRALIZER™ as directed. This will make the water safe for dumping.

  • STEP C: Drain & Clean

Turn the power off at the breaker or disconnect switch. Locate the black DRAIN & FILL valve, found inside behind the door on a portable LEEP™ model or under the step on the HYBRID4® Edition. Remove the safety cap from the fitting threaded into the valve.

Connect the female end of your garden hose. Place the other end lower than the DRAIN & FILL valve. This will help ensure complete draining.

To open, turn the outer part of the DRAIN & FILL valve counterclockwise to open and start the draining. Draining time will vary from model to model.

Once the hot tub is drained and empty, disconnect the garden hose and close the valve. While the water is draining is the perfect opportunity to protect your Beachcomber HEATSHIELD with COVER CARE™.

Clean the outside cover surface by using a mix of warm water and a gentle detergent and a soft cloth. Thoroughly rinse and allow to dry.

Spray Cover Care generously over the entire exterior cover surface until wet. Wait 30 seconds, then wipe dry and buff with a clean absorbent cloth, removing any excess. Reapply Cover Care at least once a month for optimal protection.

Rinse well with fresh water making sure the DRAIN & FILL valve of the hot tub is still open so that residue drains out. This helps to rid the hot tub of any contaminants that have ended up in the low-lying plumbing lines.

beachcomber hybrid hot tub filled with water with heatshield cover folded over

The Get Go - Easy as 1, 2, 3

  • STEP 1: Fill & Eliminate

Close the DRAIN & FILL valve. Using the FRESH FILL pre-filter attached to your garden hose start filling up the hot tub. Once hot tub water is up past the skimmer, you are now safe to turn on the power. After the hot tub is circulating with all bubbles out of the lines, add ELIMINATE to protect your hot tub from corrosion.

  • STEP 2: Accessorize & Heat

This is the perfect time to replace your hot tub accessories such as FILTER SAVERS™ and HYDRO MOP. This is the time to turn up the heat so you and your family can be soaking away blissfully in a few short hours.

  • STEP 3: Test & Balance

Be sure to test your hot tub water. This helps ensure everything is balanced for comfort and water care.

beachcomber hot tub in a backyard

Maintaining your Beachcomber Hot Tub is crucial for ensuring a safe, clean, and enjoyable soaking experience all year round. At Beachcomber Hot Tubs, we want to take the stress out of water care and maintenance. By following the simple steps of the Drain & Fill, you’ll be ready for many more relaxing moments.

Regular maintenance not only extends the life of your hot tub but also keeps the water fresh and inviting for you and your loved ones. So, take the time to care for your investment, and enjoy the benefits of a well-maintained Beachcomber hot tub. Happy soaking!

Copyright © 2013-present Magento, Inc. All rights reserved.