Spring is the perfect time for hot tubbing, when relaxing in warm water feels effortless. However, after months of cooler weather and infrequent use, debris can settle, water chemistry can drift, and filters can clog.
That’s why a little attention now makes all the difference, ensuring that when warmer weather arrives, your tub is ready to use. The goal is simple: establish repeatable habits that keep your water clear, your Beachcomber running smoothly, and your downtime stress-free.
The 10-Minute Weekly Maintenance Routine
Consistency over intensity. Just 10 minutes a week is enough to keep your hot tub in prime condition.
- Test the water: Using a water test kit, check the pH and alkalinity levels. The aim should be for a pH level between 7.2 and 7.8. Give extra attention to the water and the requirements to keep it clean and clear. It is important to maintain safe water as it directly affects a person’s health.
- Test the equipment: Run the hot tub to make sure pumps and filter are functioning properly. This helps catch any issues early.
- Clean the filter: Rinse the filter thoroughly under the water to get rid of any trapped debris or oils. This simple step extends the life of the filter.
- Wipe surfaces: While the filter dries, wipe down the surface of the hot tub and the waterline. This prevents scum from building up over time and keeps your hot tub always looking inviting.
- These habits take very little time but will truly keep maintenance easily manageable.
Small Habits That Make a Big Difference
Build a few small habits every time you use your hot tub. They take less than a minute but pay off greatly.
- Rinse before you soak: Always rinse before getting into your hot tub to remove skincare product buildup such as body oils, lotions, hair products, or detergent residue from swimwear. This helps in keeping the water clean longer.
- Clean after every soak: After each session, skim off any floating debris to prevent buildup and reduce your weekly cleanup.
- Cover it up: Fasten the hot tub cover to lock in the moisture and heat so water stays fresh longer.
- Keep supplies handy: Store your water testing kit, cleaning towels, and a hot tub scoop nearby. Consider a weekly reminder for a thorough checkup of the hot tub. These little conveniences make it easier to stay consistent with the routine.
Take Care of the Essentials
The key parts that keep your hot tub running smoothly, including filters, pumps, and the hot tub cover, are often overlooked in routine maintenance.
- Inspect the cover: Regularly check for waterlogging, cracks, leaks, or tears and clean the underside with a gentle cleaner. A well-maintained cover will lock in the heat longer and extend the lifespan of your hot tub.
- Maintain filters: Filters need occasional deep cleaning or replacement depending on usage. Rinsing them weekly is usually enough but make sure to deep clean them at least once a month to ensure optimal performance. Replace filters promptly when needed to avoid affecting your soak experience.
- Check pumps and jets: Look out for any unusual noise, leaks, or reduced pressure in the pumps and jets. Catching issues early on prevents bigger repairs down the line and saves money too. Treating your equipment well is the simplest way to protect the water and increase the longevity of your investment.
Spring is here, and it is the perfect time to give your hot tub a fresh start. Just ten minutes a week is all it takes. Check your filters, inspect the cover, give the pumps a little attention. For an extra boost, Beachcomber’s Care Free water-care system and MICROFILTER™ Pro Kit makes balancing your water and cleaning the filter even easier, letting you focus on what really matters - soaking in clean, warm water all season long.
Do this, and your water stays clear, your gear works like it should, and your Beachcomber will invite you to jump in and relax. Stick with these easy habits, and you'll spend way more time soaking and less time troubleshooting.
