What to Do with Your Hot Tub During a Winter Power Outage

What to Do with Your Hot Tub During a Winter Power Outage

A well-insulated Beachcomber hot tub with a secured Heatshield™ cover can typically retain its temperature for 24 to 48 hours during an outage. While mild weather requires little more than basic monitoring, sub-zero temperatures demand immediate action to protect the equipment. Allowing water to freeze inside the plumbing can cause severe, costly damage to your pumps and electrical components. 

First Steps When the Power Goes Out 

Keep the cover fully closed and secured, with the edges sitting evenly against the tub. This keep the water warm for longer. Opening it repeatedly to check whether the water is still warm lets heat escape without giving you a reliable picture of the plumbing or pumps. 

Check your utility provider’s updates for an estimated restoration time and note when the outage began. Along with the current temperature, check the overnight forecast, as an outage that starts on a mild afternoon could stretch into a freezing night if repairs take longer than expected. 

Beachcomber hot tub in winter with matching brown steps, snow-covered evergreen trees and a wooden privacy fence in warm sunlight.

Your model’s owner’s guide explains what measures to take during power outage in winters. Since built-in freeze protection relies on electricity to run the pumps, you may need to take additional steps to protect the equipment while the power is out. If temperatures are below freezing, contact a Beachcomber technician promptly for guidance, even while you wait for an estimated restoration time. 

When an Extended Outage Needs Professional Help 

A hot tub’s heat retention depends entirely on insulation quality, wind exposure, and the physical condition of the cover. Because these variables differ for every yard, you cannot rely on another owner’s timeline to predict how long your spa can safely withstand a blackout. 

It is also critical to remember that the main body of water cools much slower than the small volume trapped inside the pumps and plumbing. Checking the core tub temperature alone will not give you an accurate warning if these smaller, exposed components begin to freeze. 

Have your model information ready when you call your service provider, along with the outage duration and weather forecast. These details help them assess whether you need to act right away and advise what to check while you wait for power to return. 

Person using a red flashlight to navigate a dark room during a power outage.

For some models, Beachcomber’s owner’s guides describe keeping water in the tub while draining external plumbing and pumps during an extended outage. This work requires the electrical supply to be disconnected first. Your service provider can explain the procedure for your model or carry it out, as valve positions and pump connections vary. 

If a full winter shutdown is recommended, arrange for proper winterization. This involves removing water from the plumbing and equipment as well as the tub, since water left inside can freeze even after the tub has been emptied. 

Checking Your Hot Tub After Power Returns 

Any work done during the outage will affect how you restart your hot tub. Follow your model’s owner’s guide, using these checks before your next soak: 

  1. Inspect plumbing: Restore any manually drained lines or disconnected fittings completely before switching the power on. 
  2. Check for frozen lines: Do not turn the power back on if you suspect the water inside the equipment has turned to ice. Running a seized pump will quickly burn out the motor. Call for a professional diagnostic check first. 

  3. Monitor the reheating cycle: Once the system boots up, check the control panel to ensure the temperature rises gradually and steadily. 

  4. Audit for leaks and errors: Listen closely for grinding pump noises, watch for flashing display errors, and check the equipment pad for pooling water. If something looks or sounds wrong, turn the system off immediately. 

  5. Test the water: Once circulation returns to normal, check your sanitizer levels and water balance. Follow product directions for adjustments and treatment times, ensuring safe, stable readings before your next soak. Person comparing a water test strip with the colour chart on its container, with blue water in the background.

Protecting your hot tub during a winter outage means knowing when to leave it covered and when the equipment needs attention. Seek advice early in freezing weather so you can act before damage occurs. 

Made in Canada
Copyright © 2013-present Magento, Inc. All rights reserved.