HYBRID LOGO BADGE

SKU: 2510010
Beachcomber offers a 2 inch high x 6 inch long replacement Hybrid Logo Plate. This is Beachcomber’s mark of quality and stamp of approval to show the customer that they own the highest quality, best value hot tub available. This plate is designed to be affixed to the hot tub cabinet at the front of the hot tub, underneath the control panel. General positioning is 5 inches below the lip, and approximately 8 – 10 inches from the right hand side of the hot tub. This logo plate is backed with hi-tensile 3M-VHB™ adhesive, which is covered with a peel-back paper for removal at installation. Installation requires 2 holes to be drilled into the Enviroskirt to accommodate two pins on the back of the plate to help secure into position. Measurement is 3.25 inches from center to center of each pin. Ensure that holes are drilled at the time of having this part on hand to confirm the exact measurement.
$18.26
Ships from Toronto, Montreal or Vancouver
SKU
2510010
spacious seats
Up to fully customizable FLEXJETS™
Beachcomber offers a 2 inch high x 6 inch long replacement Hybrid Logo Plate. This is Beachcomber’s mark of quality and stamp of approval to show the customer that they own the highest quality, best value hot tub available. This plate is designed to be affixed to the hot tub cabinet at the front of the hot tub, underneath the control panel. General positioning is 5 inches below the lip, and approximately 8 – 10 inches from the right hand side of the hot tub. This logo plate is backed with hi-tensile 3M-VHB™ adhesive, which is covered with a peel-back paper for removal at installation. Installation requires 2 holes to be drilled into the Enviroskirt to accommodate two pins on the back of the plate to help secure into position. Measurement is 3.25 inches from center to center of each pin. Ensure that holes are drilled at the time of having this part on hand to confirm the exact measurement.
Beachcomber offers a 2 inch high x 6 inch long replacement Hybrid Logo Plate. This is Beachcomber’s mark of quality and stamp of approval to show the customer that they own the highest quality, best value hot tub available. This plate is designed to be affixed to the hot tub cabinet at the front of the hot tub, underneath the control panel. General positioning is 5 inches below the lip, and approximately 8 – 10 inches from the right hand side of the hot tub. This logo plate is backed with hi-tensile 3M-VHB™ adhesive, which is covered with a peel-back paper for removal at installation. Installation requires 2 holes to be drilled into the Enviroskirt to accommodate two pins on the back of the plate to help secure into position. Measurement is 3.25 inches from center to center of each pin. Ensure that holes are drilled at the time of having this part on hand to confirm the exact measurement.
Write Your Own Review
You're reviewing:HYBRID LOGO BADGE
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?