added to your shopping cart
MODEL 007 LEEP™ PLUG & PLAY
The 007 LEEP redefines compact luxury with its unique, hydrotherapeutic and ergonomic Liquid Chair, a deep bucket seating design for two. As a 120V / 240V Convertible model, it’s easy to move and install, and the perfect fit for urban homeowners and renters looking for the full Beachcomber experience.
Beachcomber Hot Tub Set Up & Maintained
Give your Beachcomber something extra.
Learn more about shipping times
All of the following LEEP™ Enhancement Package features are included in this model
INCLUDED Beachcomber LEEP ™ Features
BEACHCOMBER GUARANTEE
Peace of mind that your new hot tub will perform as promised is backed by an industry exclusive Guarantee, and not a Limited Warranty!
UL CERTIFIED HEATSHIELD™ COVER
The HEATSHIELD™ Cover creates a vacuum seal around the entire perimeter of the hot tub lip to prevent heat loss.
ALL-MOTION HYDROTHERAPY
Full body coverage delivering pressurized streams that pulsate, oscillate and knead, with the fusion of injected air and water to actively massage targeted areas for pain relief and relaxation.
BODY CONTOURED ERGONOMIC DESIGN
Hand-sculpted, ergonomically designed seating to support the contours of your body for comfort and relaxation.
ALL-ACTIVE SEATING
All hot tub hydro-massage seats operate at the same time with the press of a single button, allowing for a shared hydrotherapy
INTERNAL ECO-PAK™
The fully serviceable Internal Eco-Pak system uses the lowest amount of horsepower possible to efficiently achieve the maximum flow for ultimate full body massage.
ECO3WALL™ 100% CAVITY SEALED INSULATION UPGRADE
This insulation package uses lcynene foam with an r3.6 per inch rating to retain heat; which is the single most important factor affecting energy efficiency.
PERMA-SEAL™ FOUNDATION
The full thermoplastics foundation encapsulating the bottom of the hot tub seals out ground elements like water, moisture and air, and prevents critter penetration.
120V / 240V CONVERTIBLE
Comes equipped with a 120 volt GFCI cord and household plug for immediate use or can be converted to 240 volt household power for more power, performance, and energy efficiency, the choice is yours.
ENERGY SAVER MANAGEMENT SYSTEM (ESMS)
Complex network of energy management functions enabling the world's lowest energy consuming hot tubs with Digital Temperature Control.
GUARANTEE TYPE | Beachcomber Premium Guarantee |
Beachcomber Extended Premium Guarantee |
|
---|---|---|---|
Shell Structure |
Beachcomber guarantees to the original owner that the Structural Laminated Fibreglass Composition of your hot tub will never leak. If a failure occurs, we will supply the materials and technical labour for the repair. | Life Guarantee | Life Guarantee |
Acuralux™ Acrylic Surface Guarantee |
Beachcomber guarantees that the hot tub's acrylic finish will be free from defects in materials and workmanship for 5 years from the date of delivery. If a failure occurs, we will supply the materials and technical labour for the repair. | 5 years | 5 years |
Enviroskirt™ Cabinetry Guarantee |
Beachcomber guarantees that the Enviroskirt™ Cabinetry will be free from defects in materials and workmanship. If a failure occurs, we will supply the materials and technical labour for the repair. | 2 years | 5 years |
No-leak Plumbing Guarantee |
Beachcomber guarantees against leaks caused by defects in materials and workmanship. This Guarantee covers leaks from internal and external plumbing and light lenses. If a failure occurs, we will supply the materials and technical labour for the repair. | 2 years | 5 years |
Equipment Guarantee |
Beachcomber guarantees the following factory installed equipment - Management System, Control Panel, Massage Pumps, Hush Pump System™, and motors, will be free from defects in materials and workmanship for the duration of the Guarantee. If a failure occurs materials and technical labour will be supplied for the repair. | 2 years | 5 years |
Smart Sense Heater Guarantee |
Beachcomber guarantees that the Smart Sense Heater Assembly will be free from defect in materials and workmanship. If a failure occurs, we will supply the materials and technical labour for the repair. | 2 years | 5 years |
Component Guarantee |
Beachcomber guarantees the following factory installed components - Cleartech UVC™, Ozone, Everlite™, Eclipse™, Guiding Light™, Crescent Moon™, and QSS Surround Sound System™, will be free from defects in materials and workmanship for the duration of the Guarantee. If a failure occurs materials and technical labour will be supplied for the repair. *Cleartech UVC™ bulbs are covered for 1 year from delivery. | 2 years | 2 years |
Exchange Guarantee |
Beachcomber guarantees that the factory supplied hot tub Heatshield™ Cover, jetting massage inserts, steps, filter baskets, skimmer lid, and remote controls will be free from defects in Guarantee materials and workmanship for 2 years from the date of delivery. If a failure occurs, you can exchange the failed component at your local Beachcomber Dealership. | 2 years | 2 years |
Owner Transfer Option |
The remaining portion within first 24 months of the Beachcomber Protection Guarantee is transferable to a new owner. This can be done once in the lifetime of the guarantee for a small transfer fee. It is the new owner's responsibility to contact a Beachcomber representative to arrange a customer-paid installation inspection of the hot tub to activate the guarantee transfer. The transfer fee, hot tub serial number, and inspection sheet must be received by the Beachcomber Guarantee office within 60 days of ownership transfer to be valid. | 2 years | 2 years |
Energy consumption may vary significantly with ambient environmental temperature, frequency of use, filtration settings and the use of other hot tub features including temperature controls, circulating jets, and waterfalls.
Test procedures and data collection is based on the test method for Portable Electric Spas stipulated in Section 1604, Title 20, California Code of Regulations, amended on December 3, 2008. CEC testing parameters require that all units listed are tested in a third party or CEC approved laboratory, under a controlled environment with an ambient air temperature of 60(15.6 ℃)±313℉ and hot tub water temperature of 102(38.9 ℃)±213℉, with the hot tub cover on for a continuous 72 hours, and in compliance with ANSI/APSP/ICC-14 2011 and IAPMO filtration and water turnover requirements.
Pulsator Neckjet
Single Roto FLEXJET™
Cluster FLEXJET™
Vortex FLEXJET™
Twin Roto FLEXJET™
Reflex Foot Massage
*Seat depths are from the top of the tub lip down to the lowest point in the seat*
**All dimensions are approximate and vary from hot tub to hot tub**